Image Configurations

This section describes the supported image configurations.

Type	KAS Config	Description
Default Image	default.yml	The default image is the baseline configuration and is designed to be extensible. It sets up the required meta-layers, selects the default distro and image, and applies the necessary settings in local.conf. All extensions are layered on top of the default image and can be combined with each other.
NDA Extension	nda.yml	The NDA extension provides access to components that are protected by a Non-Disclosure Agreement (NDA) with MediaTek. The full list of all the features included by the NDA-enabled image is available in the Yocto Feature Table. Signing the NDA is only required if you plan to build the NDA-enabled image. You can test the NDA-enabled image without signing the NDA by downloading the prebuilt image with NDA extension enabled. To be able to build the NDA-enabled image, follow the instructions in the Git01 Setup Guide. Make sure to configure your git credentials using the genio-account-setup.py to access the NDA repositories.
DEEPX Extension	deepx.yml	The DEEPX extension adds support for the DX-M1 accelerator. It is a high-performance AI inference accelerator designed for edge devices. It connects to the host system via PCIe. For more information about DEEPX, refer to the DeepX M1 Accelerator guide.
Netboot Extension	netboot.yml	The netboot extension adds support for booting the board over the network. For setup details, see the Network Boot guide.